Rockville 10" Powered Karaoke Machine/System w/LED's+(2) Wireless Microphones

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: Rockville RPG10 600 Watt 2-Way DJ/PA Powered Speaker With a 10" Woofer and a 2" Voice Coil + Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display+ NYC Acoustics USB LED Light Strip Kit to Backlight Your TV or Monitor + Rockville RCDR10B 10' Nickel-Plated Dual RCA to Dual RCA Cable + Rockville RNRMR10 10' Nickel-Plated 3.5mm 1/8" TRS to Dual RCA Cable
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
1 YEAR AUDIOSAVINGS
Product Description
Package Includes:
(1) NYC Acoustics USB RGB LED Light Strip Package Kit to Backlight Your TV / Monitor
(1) Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
(1) Rockville RNRMR10 10' 3.5mm 1/8" TRS to Dual RCA Cable 100% Copper
(1) Rockville RPG10 10" Powered Active 600 Watt 2-Way DJ PA Speaker System
(1) Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display
Video of Youtube Karaoke:
Videos of LEDT5:
Includes:
3 LED Strips
USB connector
RGB remote
Owner's manual
What makes our light strip package the best?
1. We include 3 strips each the perfect length with the perfect cable length. Our top strip is twice as long. Ours is 26 inches (competitors are usually 12 to 15 inches). Ours is the perfect size for TVs ranging from 32 inches to 70 inches. At the end of each strip we have 7 inches of cable so you can plug one strip to the next without excessive amounts of wire all over the place. We intentionally include 3 strips, not 4. Trust me you do not want a strip on the bottom of your TV as I tested this and you will not be able to see the light because the TV blocks it. Also on most TVs there is no place to tape down the bottom strip where it is not in the way. You are better off with 3 strips that are each the proper size.
2. We use special red series 3M adhesive that is stronger and longer lasting.
3. No power adapters needed, simply plug the USB cable to the USB port of your TV. (Our competitors' products have these thick adapters).
4. Our LED strip is IPX68 waterproof and dustproof. The IPX68 finish also makes the light look nicer.
5. 90 day money back guarantee. If you are not happy with them, we will send you a pre-paid label and refund you all of your money!
Features:
NYC Acoustics LED light strip package to backlight your TV
Includes (3) Strips
Long strip for the top of the TV is 26 inches
The strips for the right and left side of the TV are each 14 inches
Each end of the light strip has a 7 inch wire with a connector cable to connect one LED strip to the next one
24-key RGB remote can change the light 16 different colors
Strobe mode can make lights blink
Adjustable brightness
Color changing mode will gradually change the color of the LED light
IP68 Waterproof and dust proof and shock proof
Red series top of the line 3M adhesive sticks to your TV without damaging it
Gets power from any USB source
Soothing backlight ensures less strain on your eyes when you watch TV
Resistant to high temperature, water, and dust
Lights always run cool to the touch
Low current draw makes zero noise and never flickers
Specifications:
Input voltage: 5V
Input current: 0.65A
Output power: 3.27W
LED type: SMD5050
Power: 2.5W / Meter
Beam angle: 120 degree
Lumens per LED: 18
Video of RCDR10B:
Authorized Rockville Dealer
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable
Dual RCA to Dual RCA
Nickel-Plated for Rugged Durability and Efficient Signal Transfer
100% Copper Conductors for Enhanced Signal Clarity
OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
Length: 10 Ft
Color: Black
Video of RNRMR10:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
Rockville RNRMR10 3.5mm 1/8" TRS to Dual RCA Cable
Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer
100% Copper Conductors for Enhanced Signal Clarity
OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
Length: 10 Ft
Video of RPG10:
How to Set Up RPG Series Speakers (RPG8, RPG10, RPG12, RPG15) :
The Rockville RPG10 powered PA speaker is simply amazing in terms of sound quality, and raw power! This speaker has an incredible 600 watts of peak power and will deliver a massive amount of bass, mids, and highs. The ultra-efficient design is amazing!
This speaker is the result of a year of research and development. We tested samples of 5 top selling powered speakers and the RPG series out-performed them all. These go louder and have punchier bass. What we found to be interesting was that some of the other speakers we tested against these were rated by their manufacturers at 1,200 watts or more, but they only went around half as loud as these.
The 10" woofer built into this speaker has a 2" aluminum voice coil which provides an extremely loud, deep, punchy bass response. Couple that with our state-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver and the ultra-wide dispersion, 40° large-format horizontal wave guide horn and you get beautiful full range concert-quality sound. The linear class A/B amplifier built into these speakers is efficient and provides clean power to the speaker. Some of the competing speakers use cheap amps in their speakers. We really went out of our way to make sure the amp built into these speakers gives you enough power so you can really feel and taste the music. The amplifier also has a clipping LED and a limiter to ensure long life to the speaker. The built in 2 band EQ will allow you to fine-tune and tweak the sound to your liking.
The RPG10 has a versatile trapezoidal enclosure design which allows you to use it as a PA speaker or you can use the included mounting brackets and lay it on its' side to be used as a floor monitor. It is also flyable and stand mountable giving you many options on how you can utilize these speakers.
We also included all the inputs and outputs you would need along with great controls. These have XLR and 1/4" ultra-low noise Mic / Line inputs with volume control as well as line RCA and XLR inputs with separate Gain adjustments. There is also an additional balanced line output via XLR for linking of additional speakers.
If you are in the market for a high quality 10" active speaker, then we highly recommend the RPG10. We feel this is the best value on the market. You get great features, great quality, high power, and a lot of versatility for a great price.
Features:
Rockville RPG10 10" Active/Powered 600 Watts DJ/PA Speaker System
150-Watt RMS / 300 Watts Program Power / 600 Watts Peak
High power long-throw 10'' woofer with 2" aluminum voice coil provides incredibly deep bass and acoustic power
Frequency Response: 45Hz-20KHz
Maximum SPL @1w/1m: 122dB peak / 119dB continuous
High-power 2-way pro sound reinforcement speaker system for live sound and playback applications
Compact and light weight system delivers distortion free sound even at extreme SPL
Linear Class AB amplifier technology: high power, transparent sonic performance
Internal switch-mode power supply for low distortion audio with superior transient response
Built-in bass and treble equalization processor for ultimate system control and speaker protection
State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet
Ultra-low noise Mic / Line input via XLR & 1/4-inch stereo jacks with volume control
Line RCA and XLR input with separate Gain adjustment
Additional balanced line output via XLR for linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning
Flyable and stand mounting with 35-mm pole socket
Ergonomically shaped handle for easy carrying and setup
High-quality components and exceptionally rugged high impact ABS construction
Amplifier clip limit LED indicator & power LED cabinet rear
Front display power meter Blue LED
110 / 220 Volt switchable power supply with external user serviceable fusing
Dimensions :
14.21" X 10.87" X 19.72"
Owner’s Manual
HOW TO SET UP YOUR RWM1203VH:
Video of RWM1203VH:
Includes:
2 wireless handheld microphones
1 receiver unit
User manual
Batteries
Transfer Cable
Features:
Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System
Large display on receiver + digital display on each mic
Each mic is large and solid with a nice weighted feel
Improved high performance wireless handheld microphone capsule
Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones
Featuring a dual filter design to limit feedback and interference
Ultra signal stability eliminates unwanted distortion
Transmitter automatically links to receiver for ease of use
Use two handheld mics at once
Individual microphone volume controls
Low power consumption for longer battery life
System comes in 4 different frequency options. You can request a specific one in the notes
A. 255.1/227.1 MHZ
B. 224.9/256.9 MHZ
C. 228.9/253.4 MHZ
D. 230.8/255.8 MHZ
Specifications:
System:
Operating Range: 150 feet or more
Channel: Two Channel
Frequency Range: 210MHz - 270MHz
Frequency Response: 40Hz-18KHz
S/N.:>103dB (1KHz-A)
Operating Temp: 14°F – 122°F
Oscillation Mode: Quartz Crystal
Frequency Stability: ±0.005%
Modulation Mode: VHF
Harmonic Radiation :< 63dBm
RF Output Power: 10mW
Power Voltage: AC110V- 60Hz
Mic Battery: AA x 2
Receiver:
Sensitivity: (S/N=30dB) >2mV
Audio Output Impedance: 600O
Audio Output Level.: 0-0.5V
Power Supply: AC110V 60Hz
Current Consumption: =50mA
Audio Out Connector: 1/4" unbalanced
Transmitter:
Frequency Stability: ±0.005%
RF Output Power: =10mW
Modulation Mode: VHF
Maximum Deviation Range: ±50KHz
Microphone Mode: Fixed
Power Supply: AA/1.5V×2
Current Consumption: =35mA
Owner’s Manual
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: RPG10+RWM1202VH+LEDT5 KAR
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design